VTX10X(n)
Minimultiple Vacuum Pump
- Max Vacuum Level: -92 kPa
- Open Vacuum Flow: 32 Nl/min
- Air Consumption: 48 Nl/min @ 5.5 bar
SKU: VTX10X(n)
Category: Minimulitple Pump / Vacuum Generators
VMECA Minimultiple Pumps are stacked with mini pumps. Each pump creates vacuum as an individual pump. The advantages of this unit is that it can be operated using just two control valve while retaining individual vacuum lines separate to one another, therefore if any leakage or surface deformation occurs and one pad loses it vacuum, it does not effect the vacuum level in the other pads. Pumps can be stacked up from 2-12 units depending upon requirements.
Individual vacuum operation
Stackable up to 12 vacuum generators
Quick response time
Reliable performance
Multi-stage ejector
1. Basic Model
| Symbol | Description |
| VTX10 | Minimultiple, VTX10 |
2. Number of Stacks
| Symbol | Description |
| 2 | Minimultiple, VTX10, 2-stacked pump |
| 4 | Minimultiple, VTX10, 4-stacked pump |
| 6 | Minimultiple, VTX10, 6-stacked pump |
| 8 | Minimultiple, VTX10, 8-stacked pump |
| 10 | Minimultiple, VTX10, 10-stacked pump |
| 12 | Minimultiple, VTX10, 12-stacked pump |
3. Air Control Valve
| Symbol | Description |
| Blank | No air control valve |
| A1 | Air control valve, AC 110V |
| A2 | Air control valve, AC 220V |
| A3 | Air control valve, DC 24V |
4. Valve Terminal
| Symbol | Description |
| Blank | No air control valve ☛ “Option 2”, Air control valve |
| DN | Solenoid terminal, DIN type, No lead wire |
| DL | Solenoid terminal, DIN type, No lead wire, Lamp |
| CL | Solenoid terminal, Connector type, 30 cm lead wire |
| ☛ “The valve terminal ” option is only available when you chose air control valve. | |
| ☛ “CL” option is only available with DC24V. | |
| 2B | Solenoid terminal, DIN, 2-in-1 BUS cable |
5. Vacuum Port
| Symbol | Description |
| 2 | Push-in fitting, 2 mm inner diameter |
| 4 | Push-in fitting, 4 mm inner diameter |
6. Sealing Material
| Symbol | Description |
| Blank | NBR sealing material |
| V | Viton sealing material |
| E | EPDM sealing material |
1. General Specifications
| Max Vacuum Level | -92 kPa |
| Open Vacuum Flow | 32 Nl/min |
| Feed Pressure | 5.5 bar (Max 7 bar) |
| Air Consumption | 48 Nl/min |
| Temperature | -20 ~ 80 ℃ |
| Weight: VTX10X2: | 67 g (Increased 13 g per additional stack) |
| Weight: VTX10X4: | 245 g (Increased 18 g per additional stack) |
2. Vacuum Flow
| Max Vacuum | Feed Pressure | Vacuum Flow (Nl/min) at different vacuum level (-kPa) | |||||||||
| -kPa | bar | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 |
| 92 | 5.5 | 32 | 21 | 17 | 15 | 14 | 11 | 9 | 5.4 | 2.4 | 0.9 |
3. Evacuate Time
| Feed Pressure | Air Consumption | Evacuation time in sec per liter to reach different vacuum level (-kPa) | ||||||||
| bar | Nl/min | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 |
| 5.5 | 48 | 0.129 | 0.398 | 0.758 | 1.2 | 1.78 | 2.455 | 3.455 | 5.08 | 9.594 |
|
VTX10X(2~3): |
Unit: mm
| Pump | L1 | L2 |
| 2-Stack | 28 | 94 |
| 3-Stack | 35 | 101 |
| No | Description |
| 1 | Compressed-Air Port, G 1/8″ |
| 2 | Vacuum Port, ∅2 or ∅4mm |
| 3 | Exhaust Port |
| 4 | Air Control Valve |
|
VTX10X(4~7): |
Unit: mm
| Pump | L1 | L2 |
| 4-Stack | 38.3 | 48.3 |
| 5-Stack | 45.5 | 55.5 |
| 6-Stack | 53 | 63 |
| 7-Stack | 60 | 70 |
| No | Description |
| 1 | Compressed-Air Port, G 1/8″ |
| 2 | Vacuum Port, ∅2 or ∅4mm |
| 3 | Exhaust Port |
| 4 | Air Control Valve |
|
VTX10X(8~16): |
Unit: mm
| Pump | L1 | L2 |
| 8-Stack | 67.5 | 77.5 |
| 9-Stack | 74.8 | 84.8 |
| 10-Stack | 82 | 92 |
| 11-Stack | 88.5 | 98.5 |
| 12-Stack | 96 | 106 |
| 13-Stack | 103.2 | 113.2 |
| 14-Stack | 111 | 121 |
| 15-Stack | 118 | 128 |
| 16-Stack | 125.2 | 135.2 |
| No | Description |
| 1 | Compressed-Air Port, G 1/8″ |
| 2 | Vacuum Port, ∅2 or ∅4mm |
| 3 | Exhaust Port |
| 4 | Air Control Valve |
Vacuum Pumps & Spare Parts
| Part Number | Description |
| MS18-3-1 | 2/2-way sol valve, G1/8″ inlet, DC 24V, DIN type |
| MS18-3-2 | 2/2-way sol valve, G1/8″ inlet, DC 24V, DIN type, Lamp |
| MS18-3-3 | 2/2-way sol valve, G1/8″ inlet, DC 24V, Conn. type, 30 cm lead wire & Lamp |
| MS18-2-1 | 2/2-way sol valve, G1/8″ inlet, AC 220V, DIN type |
| MS18-2-2 | 2/2-way sol valve, G1/8″ inlet, AC 220V, DIN type, Lamp |
| MS18-1-1 | 2/2-way sol valve, G1/8″ inlet, AC 110V, DIN type |
| MS18-1-2 | 2/2-way sol valve, G1/8″ inlet, AC 110V, DIN type, Lamp |
| Seal Kit | Please contact VMECA. |
Catalog Files
| Catalog | ||
| VTX10X(n) |  |
