VP Vacuum Switch VMECA

Vacuum Switch(VP32)

Digital Vacuum Switch

  • Pressure Range: -101.3 ~ 100 kPa, 0 ~ 1000 kPa
  • Display: LED 4-digit, 7-segment
  • Sensor Outputs: NPN or PNP open collector
  • Weight: 80 g

SKU: VP32
Category: Vacuum and Pressure Switches, Sensors

Vacuum switches are a type of pressure switch that functions in the vacuum end of the pressure. Their primary purpose is to monitor vacuum status and open or close a connection when there is a change in the vacuum level.

Pressure Range: -101.3 ~ 100 kPa, 0 ~ 1000 kPa

Display: LED 4-digit, 7-segment

Sensor Outputs: NPN or PNP open collector

Weight: 80 g

VP32

1.Basic Model

Symbol Description
VP32 Digital vacuum switch, VP32 series

2. Pressure Range

Symbol Description
P Positive pressure, 0 ~ 100 kPa
V Negative pressure, -101.3 ~ 0 kPa
C Compound pressure, 0 ~ 1000 kPa

3. Output

Symbol Description
010 2-NPN output
030 2-PNP output

4. Pressure Port

Symbol Description
F1 PT 1/8 male, M5 female connector

5. Connection

Symbol Description
Blank 2 m lead-wire
C M8-4pin male

6. Analog Output

Symbol Description
Blank No analog output
A 1~5V analog output: Only for wire type

General Specifications

Model V32P V32V V32C
Pressure range 0 ~ 1,000 kPa -101.3 ~ 10 kPa -101 ~ 101 kPa
Withstand pressure 1,500 kPa 500 kPa 500 kPa
Fluid Filtered air, Non-corrosive, Non-flammable gas
Set pressure resolution kPa 0.1 0.1
MPa 0.001
Kgf/cm² 0.01 0.001 0.001
bar 0.01 0.001 0.001
psi 0.1 0.01 0.01
inHg 0.1 0.1
mmHg 1 1
Power supply voltage 12 to 24V DC±10%, Ripple (P-P) 10% or less
Current consumption ≤40mA (With no load)
Switch output Output type 2-NPN or 2-PNP open collector
Max. load current 125 mA
Max. supply voltage 30V DC @ NPN output, 24V DC @ PNP output
Residual voltage ≤1.5V
Response time ≤2.5 ms (Chattering-proof function: 25, 100, 250, 500, 1000, 1500 ms selections)
Output short prot. Yes
Analog output Voltage output 1 ~ 5 V (±2.5%)
Voltage impedance About 1 Ω
Linearity ±1% F.S.
Display LED Display 4 digit, 7 segment (red)
Switch ON indicator Out-1 red/ Out-2 green
Updates time About 0.2 s
Indicator accuracy ±2% F.S. ±1 digit (ambient temperature: 25±3℃)
Repeatability (Switch output) ±0.2% F.S. ±1 digit
Environment Enclosure IP40
Operation temp. 0 ~ 50℃
Storage ambient temp. -10 ~ 60℃ (No condensation or freezing)
Ambient voltage 35 ~ 85% RH (No condensation)
Withstand voltage 1000V AC in -1min (between case and lead wire)
Insulation resistance 500 MΩ (at 500V DC, between case and lead wire)
Vibration Total amplitude 1.5mm or 10G, 10~55 Hz scan for 1-min, 2-hour each direction of X, Y, and Z
Shock 980 m/s² (10G), 3-time each in direction of X, Y, and Z
Temperature characteristic ±2% F.S. of detected pressure (25℃) at temp. range of 0 ~ 50℃
Port size M5
Lead wire 26 AWG, UL AWM 20276, 1000 mm
Weight 80 g (with 2-meter lead wire)

VP32: NPN output

VP32: NPN output

VP32: NPN output with Analog output

VP32: NPN output with Analog output

VP32: PNP output

VP32: PNP output

VP32: PNP output with Analog output

VP32: PNP output with Analog output

Dimensions

VP32: Body

VP32: Body - Dimensions

VP32: Mounting bracket

VP32: Mounting bracket - Dimensions

VP32: Panel Type

VP32: Panel Type - Dimensions

VP32 series switches

Part Number Description
VP32C-01-F1 Vacuum switch, 2-color LED-display, NPN 2-output, No analog supply, 2m lead-wire
VP32C-01-F1-C Vacuum switch, 2-color LED-display, NPN 2-output, No analog supply, M8 4-pin male
VP32C-01-F1-A Vacuum switch, 2-color LED-display, NPN 2-output, Analog supply, 2m lead-wire
VP32C-03-F1 Vacuum switch, 2-color LED-display, PNP 2-output, No analog supply, 2m lead-wire
VP32C-03-F1-C Vacuum switch, 2-color LED-display, PNP 2-output, No analog supply, M8 4-pin male
VP32C-03-F1-A Vacuum switch, 2-color LED-display, PNP 2-output, Analog supply, 2m lead-wire
VP32V-01-F1 Vacuum switch, 2-color LED-display, NPN 2-output, No analog supply, 2m lead-wire
VP32V-01-F1-C Vacuum switch, 2-color LED-display, NPN 2-output, No analog supply, M8 4-pin male
VP32V-01-F1-A Vacuum switch, 2-color LED-display, NPN 2-output, Analog supply, 2m lead-wire
VP32V-03-F1 Vacuum switch, 2-color LED-display, PNP 2-output, No analog supply, 2m lead-wire
VP32V-03-F1-C Vacuum switch, 2-color LED-display, PNP 2-output, No analog supply, M8 4-pin male
VP32V-03-F1-A Vacuum switch, 2-color LED-display, PNP 2-output, Analog supply, 2m lead-wire
VP32P-01-F1 Vacuum switch, 2-color LED-display, NPN 2-output, No analog supply, 2m lead-wire
VP32P-01-F1-C Vacuum switch, 2-color LED-display, NPN 2-output, No analog supply, M8 4-pin male
VP32P-01-F1-A Vacuum switch, 2-color LED-display, NPN 2-output, Analog supply, 2m lead-wire
VP32P-03-F1 Vacuum switch, 2-color LED-display, PNP 2-output, No analog supply, 2m lead-wire
VP32P-03-F1-C Vacuum switch, 2-color LED-display, PNP 2-output, No analog supply, M8 4-pin male
VP32P-03-F1-A Vacuum switch, 2-color LED-display, PNP 2-output, Analog supply, 2m lead-wire
VCM8-4-2 M8-female connector, 4-Pin & 2m lead-wire
Bracket D Mounting bracket kit, for direct installtion, BT-1 & BT-2
Bracket E Mounting bracket kit, for panel installation, FPC-1, PA-1, & PA-2

Catalog Files

Catalog
VP32 Switches pdf-icon

Related Products

VMECA-Email_icon